Click on the image to check the artwork
Description
Online automatic screwdriving machine for LCD back shell adopts the initial positioning of the cylinder and the accurate positioning of the CCD to realize automated operation. One line can complete the work load of 3 - 4 workers at the speed of locking two screws per second which ensures the screw-locking torque and effectively avoids the poor phenomena of missing locks, sliding teeth and floating. The defective rate can be controlled below one thousandth.
Product Technical Specifications
|
Model NO. |
GT-LS1204S |
|
|
Size |
L1200×W1100×H1600 (mm) |
|
|
Working Stroke |
X axis |
750mm |
|
Y axis |
450mm |
|
|
Z axis |
150mm |
|
|
Operating Speed |
0.1~1000mm/s |
|
|
Positioning Accuracy |
±0.02mm |
|
|
Repeat Accuracy |
±0.02mm |
|
|
Drive Mode |
Precision Servo Drive |
|
|
Control System |
Industrial PC + Motion Control Card |
|
|
Speed Control |
Automatic rising-lowering speed with velocity look-ahead |
|
|
Motion Mode |
Linear Module |
|
|
Location Mode |
Mechanical Position |
|
|
Locking Efficiency |
0.5-1.5S/PCS |
|
|
Electric Screwdriver |
Select by demands |
|
|
Maximum Lock Size |
50-inch TV screen (customizable for larger size) |
|
|
Screw Conveying Way |
Air breathing type/ air blowing type (available) |
|
|
Screw Conveying Speed |
60 pcs/ minute |
|
|
Diameter of Applicable Screw |
Air blowing type: M2-M8mm Air breathing type: M1-M6mm |
|
|
Type of Applicable Cap |
Round head/ flat head/ countersunk head |
|
|
Length of Applicable Screw |
Air blowing type: 5-25mm Air breathing type: 2-25mm |
|
|
Twisting Force |
0.1~50kgf.cm |
|
|
Program Storage |
No Limit |
|
|
Communication Port |
USB |
|
|
Ambient Temperature |
0℃~40°C |
|
|
Relative Humidity |
20%-90% |
|
|
Air Supply |
0.4~0.6Mpa |
|
|
Power Supply |
220V 50Hz |
|
|
Weight |
Approx 500kg |
|
|
Automatic Detection |
Detection of Screw Slippage |
Yes |
|
Detection of Screw Lock Missing |
Yes |
|
|
Detection of Screw Float |
Yes |
|
https://www.gtokata.com/